Drawing No. DD-MPI-420-115
Machined,
not manufactured.
Every Ditron implant starts as a Ti-6Al-4V ELI bar on a Swiss-type CNC turning center and leaves the floor verified to tolerances of 0.02 mm. Aerospace discipline, applied to the jaw.
Implant-abutment fitting measured at the micron level on every production batch.
Swiss-type CNC turning centers held to tolerances most industries never ask for.
Extra-low interstitial alloy, the same specification used in aerospace and cardiac devices.
Every implant passes optical metrology and clean-room final inspection before packaging.
Implant systems
| System | Designation | Diameters (mm) | Lengths (mm) | Connection |
|---|---|---|---|---|
| MPI | Molecular Precision Implant | 3.30 · 3.50 · 3.75 · 4.20 · 5.00 · 6.00 | 6.0 · 8.0 · 10.0 · 11.5 · 13.0 · 16.0 | Conical + Moleculock™ |
| ULT | Ultimate | 3.75 · 4.20 · 5.00 · 6.00 | 7.0 · 8.0 · 10.0 · 11.5 · 13.0 · 16.0 | Conical + Moleculock™ |
| OPI | One Piece Implant | 3.00 · 3.30 | 10.0 · 13.0 | One-piece |
Process control
Moleculock™
A patented molecular-level seal between implant and abutment that minimizes the micro-gap, reduces bacterial leakage, and protects crestal bone.
Surface treatment
SLA surface: sandblasted with large grit, acid-etched, then verified for cleanliness with spectrometry. Roughness engineered for fast osseointegration.
Clean-room assembly
Implants are cleaned, assembled and packaged in an ISO-classified clean room, then gamma-sterilized. Sterility is documented per lot.